the-swinging-sticks-trademark-logo-made-in-germany
german-flag

Sparked from a vision and designed by a German Engineer who initiated an effort for the pursuit and creation a perpetual motion machine. In the year of 1996 he invented – THE SWINGING STICKS.

While on sabbatical in 1997 we discovered a Taiwanese artist who possessed inner peace, passion, drive to assist in the quest of a perpetual motion machine. Working in concert with me over the years they discovered the right mechanics and formula for perfection of THE SWINGING STICKS.

The next step to be undertaken was to seek suitable facilities specializing in high precision manufacturing to produce the required components. To facilitate building THE SWINGING STICKS a prototype workshop was set up in Taiwan end of the 1990th. During the year 2000 we finalized the proper order and method of assemblage, equipment, tools, and quality control for an initial small-scale serial production model for future larger scale expansion.

Because Swinging Sticks require absolute precise components to meet the stringent QC requirements the quantities are limited. However, with the advent of increased investments we were  able to increase volumes beginning second half 2019. The required steps creating integral parts to assemble a Swinging Stick.

The base is cut utilizing Computer Numerical Control (CNC) machines. Afterwards, each base goes thru a visual QC inspection to determine if any defects exist. Once approved and signed off each base then polished several times and final has at least 5 layers of a non-toxic finish applied. Each base is given a final visual QC check. Rejected parts are sent to a local recycler.

The aluminum tubes are extruded from highest quality aluminum available. This assures each tube’s walls will be perfectly round without varying thickness so that a balanced fluid motion is achieved. Symmetrical tube walls allow the placement of the bearing hub to be inserted with optimum resistance as it is pushed down the tube shaft. Forced long live high-quality bearings would then be integrated in the tube’s hub bearings of THE SWINGING STICKS.

Each bearing hub is precisely CNC’d to a diameter that lets the hub be gently inserted down the main axis with just enough resistance to prevent the hub from exiting the other end. The bearing cavity is drilled then chamfered which prevents distortion to the tiny bearings. Once completed the bearings are tested to ensure the axle revolves effortlessly.

After the hub/bearing assembly is completed the stain-less steel axle is inserted level into its resting place otherwise the balanced motion without deviation from its range of motion will be lost. Proper axle insertion is crucial for years of enjoyment of THE SWINGING STICKS.

THE SWINGING STICKS assembly requires complete concentration and a set of calm hands There is no margin for error. The procedure is 100 % completed by hand, such as setting the final holes, weights, making necessary adjustments and a recheck of balance testing. Each of THE SWINGING STICKS takes a few hours each unit.

A final QC test of THE SWINGING STICKS is live testing for a minimum of 7 days to Insure each and every Of The Swinging Stick is performing flawlessly. If a unit fails to operate as required critical components will be replaced if possible or the unit discarded.

Once a SWINGING STICK passes a stringent QC testing with a final visual check each single piece each unit is packed into an eye appealing box. THE SWINGING STICKS are sent to customers thru-out the world.

YOU will receive a perfect, handmade, exclusive product, that will enliven your home or office…tss-laser-security-sticker

Your Swinging Sticks comes with a unique personal serial number.

In the event it is desired to cease the motion of THE SWINGING STICKS, just gently stop the motion of the small and big Swinging Stick placing each of them in 6 o’clock position. This will instigate a sleep mode for the electronic function.

Initiate the start mode, you just Lift Up the big Stick by 90 degree and release…

Thank you very much for your attention and interest in our item.

Yours,  

T. Schneider  IPO